Most LED strips give away their individual diodes as a row of bright dots. This one does not. The COB design packs 5,760 LEDs across 32.8 feet, 576 every 3.28 ft, so the light reads as one smooth continuous line with no dark spots and a wide 180° spread. Twenty individually addressable segments mean you can run different colors and brightness levels along the same strip, and RGB Smart IC technology keeps multi-color effects synchronized. Control it from the app with scene modes and timers, or grab the remote for a quick change.
Why Customers Choose This Product
- COB construction with no visible dots or dark spots
- 5,760 LEDs across 32.8 ft, at 576 LEDs per 3.28 ft
- 20 individually addressable segments for per-section color and brightness
- RGB Smart IC technology for synchronized multi-color effects
- Wide 180° beam angle for even wash lighting
- App control with scene modes and timers, plus a physical remote
- Fully dimmable
- Adhesive backing and a flexible strip that follows corners and curves
- Cuttable at marked intervals for custom runs
Product Highlights
Dot-Free COB Light
High-density COB LEDs blend into a single continuous line of light rather than a string of points. That makes it far better than a standard strip anywhere the strip itself is visible.
Twenty Addressable Segments
Each of the 20 segments takes its own color and brightness, so you can build gradients, chases and custom patterns along one run. Useful for holiday displays and everyday accent scenes alike.
RGB Smart IC Technology
The built-in IC drives several colors on the same strip at once and keeps the effects in sync. No separate controller box per zone.
App and Remote Control
The smartphone app handles scene modes, timers and fine adjustments. The included remote covers the everyday on, off, color and brightness changes without reaching for a phone.
Adhesive, Flexible Install
Peel and stick along coves, shelving, cabinet undersides, stair edges or ceiling perimeters. The strip bends around corners and can be cut at the marked intervals.
Pixel Adjustment
If a segment behaves unexpectedly, pixel adjustments through the app or remote let you correct it without pulling the strip off the wall.
Specifications
- Length: 32.8 ft
- LED count: 5,760 total, 576 per 3.28 ft
- LED type: COB, integrated
- Color: RGB with warm white at 3000K
- Segments: 20 individually addressable
- Beam angle: 180°
- Wattage: 72 W
- Dimmable: yes
- Control: smartphone app and included remote
- Mounting: adhesive backing
- Use: indoor
- Lighting purpose: accent lighting
- Package quantity: 1 strip
- Included: 32.8 ft strip, control box, 24-volt adapter, connectors, remote control
- Brand: BIBIVIS
Ideal For
- Bedroom coves, headboards and ceiling perimeters
- Holiday and seasonal displays that need color changes
- Under-cabinet and shelf accent lighting
- Stair edges, hallways and toe-kick lighting
- Media rooms, gaming setups and bar areas
- Any run where the strip is visible and dotted light would look wrong
Important Information
- Rated for indoor use only. Do not install in wet or exposed outdoor locations.
- Use only the supplied 24-volt adapter and control box. Substituting a different power supply can damage the strip.
- Cut only at the marked intervals, with the power disconnected, and observe correct polarity when reconnecting.
- Clean and dry the mounting surface before applying the adhesive. Dust and moisture are the usual causes of a strip peeling later.
- Do not leave the strip rolled or coiled while it is powered on, as trapped heat can shorten LED life.
- If you hardwire the control box into building wiring, switch off the breaker first and use a licensed electrician where local code requires it.
- Follow the included instructions for wiring, app pairing and pixel setup.
Frequently Asked Questions
What makes a COB strip different from a normal LED strip?
COB packs the LEDs at very high density, 5,760 across this 32.8 ft run, so the light comes out as one continuous line instead of a row of visible dots with dark gaps between them.
Can different parts of the strip show different colors?
Yes. There are 20 individually addressable segments, each of which can be set to its own color and brightness.
How do I control it?
Two ways: the smartphone app for scene modes, timers and detailed adjustments, or the included remote for quick changes.
Can I cut it shorter?
Yes, at the marked intervals only. Disconnect the power first and keep the polarity correct when you reconnect.
Can I use it outdoors?
No. This strip is rated for indoor use only.
What comes in the box?
The 32.8 ft strip, a control box, a 24-volt adapter, connectors and the remote control.
How much power does it draw?
72 watts for the full 32.8 ft run, supplied through the included 24-volt adapter.
Is it dimmable?
Yes, and brightness can be set per segment as well as across the whole strip.
Will it stick to any surface?
The adhesive backing works best on clean, dry, smooth surfaces. Wipe the surface down first, and use mounting clips on textured or dusty materials.
If you have ever installed a strip light and then spent the evening looking at the dots, the COB difference is the whole point of this one. Thirty-three feet of smooth, dimmable, segment-addressable light with an app, a remote and everything needed to wire it up in the box.
