One wall panel instead of a drawer full of apps. This 10.1 inch Android touchscreen brings your smart home onto a single screen, with Zigbee and Bluetooth gateways built in so paired devices talk to it directly rather than through yet another plug-in hub. Wi-Fi and RS-485 are supported alongside them, two microphones handle voice commands, and the companion app keeps the same control available when you are out. At 13 mm deep without its base, the panel sits nearly flush on the wall, or use the base to stand it on a counter.
Why Customers Choose This Product
- Large 10.1 inch touchscreen for direct, tap-to-control operation
- Built-in Zigbee and Bluetooth gateways, so no separate hub is needed
- Four protocols supported: Wi-Fi, Bluetooth, Zigbee and RS-485
- Two built-in microphones for hands-free voice commands
- Mobile app for remote management and monitoring
- Flexible power: mains 100 to 240 VAC or 12V 1A USB-C
- Onboard 2-way relay rated 200VA maximum
- Slim 13 mm profile without the base, with a desk base included in the design
- Multilingual interface running on Android
Product Highlights
Gateways Built In
Integrated Zigbee and Bluetooth gateways let the panel pair with sensors, switches and bulbs directly. That removes a separate hub from the setup and one more thing from your outlets.
Four Protocols, One Screen
Wi-Fi, Bluetooth, Zigbee and RS-485 are all supported, so devices from different ecosystems can be managed in one place. RS-485 in particular opens the door to wired building systems.
Ten Inches of Direct Control
A 10.1 inch display is big enough for real scene buttons and device tiles rather than a cramped menu. Anyone in the house can use it without installing anything on their phone.
Dual-Microphone Voice
Two microphones pick up voice commands from across the room, so you can trigger scenes with your hands full.
Wire It In or Plug It In
The panel accepts mains input at 100 to 240 VAC for a permanent wall installation, or 12V 1A over USB-C if you would rather not open a wall box.
Flush on the Wall or Free-Standing
The body is 259 x 161 x 13 mm on its own and 37 mm deep with the base fitted, so it can sit nearly flat against a wall or stand on a surface.
Specifications
- Screen size: 10.1 inches
- Operating system: Android
- Wireless and wired protocols: Wi-Fi, Bluetooth, Zigbee, RS-485
- Built-in gateways: Zigbee and Bluetooth
- Mains input: 100 to 240 VAC (±10%), 50/60 Hz
- Low-voltage input: 12V 1A USB-C
- Relay: 200VA maximum, 2-way
- Microphones: 2
- Dimensions without base: 259 x 161 x 13 mm
- Dimensions with base: 259 x 161 x 37 mm
- Weight: 1.74 kg
- Interface: multilingual
- Application: home
- Regional versions: EU, US and AS
- Place of origin: Guangdong, China
- Brand: STROVAN
- Package contents: refer to the product images
Ideal For
- Homes with smart devices spread across several apps
- Zigbee setups that would otherwise need a standalone hub
- Households where not everyone wants to use a phone app
- Entryways, hallways and kitchens as a central control point
- Installations that mix wireless devices with wired RS-485 systems
- Anyone who wants one-tap scenes rather than per-device fiddling
Important Information
- Choose the correct regional version for your country: EU, US or AS. The versions differ in electrical fitment, so ordering the wrong one may leave you unable to install it.
- Mains installation involves 100 to 240 VAC wiring. Switch off the circuit at the breaker and use a licensed electrician for any in-wall connection.
- Manufacturer data does not list safety certifications for this product. Confirm local electrical code and approval requirements before hardwiring it into a wall.
- Do not exceed the 200VA maximum relay rating across the two channels.
- For indoor residential use. Keep the panel away from moisture, direct heat and direct sunlight.
- Check that your existing devices use Wi-Fi, Bluetooth, Zigbee or RS-485 before ordering. Devices on other protocols such as Z-Wave or Thread are not covered by this panel.
- Package contents are shown in the product images rather than listed in the manufacturer data. Contact us before ordering if you need mounting hardware confirmed.
- Follow the included instructions for mounting, wiring and app pairing.
Frequently Asked Questions
Do I still need a separate Zigbee hub?
No. Zigbee and Bluetooth gateways are built into the panel, so compatible devices pair directly with it.
Which protocols does it support?
Wi-Fi, Bluetooth, Zigbee and RS-485. Devices using other standards such as Z-Wave or Thread are not supported.
How is it powered?
Two ways: mains at 100 to 240 VAC, 50/60 Hz for a permanent installation, or 12V 1A through USB-C.
What is the difference between the EU, US and AS versions?
They are regional variants for different electrical fitment. Order the one that matches your country.
Can I control it when I am away from home?
Yes. A mobile app lets you manage and monitor connected devices remotely.
Does it take voice commands?
Yes. Two built-in microphones support hands-free voice operation.
How thick is the panel on the wall?
259 x 161 x 13 mm without the base, and 259 x 161 x 37 mm with the base fitted for free-standing use.
What operating system does it run?
Android, with a multilingual interface.
If your smart home has grown into a collection of apps and hubs, a wall panel with the gateways already inside is the tidy way back to one place. Pick the regional version that matches your wiring, decide whether you are wall-mounting or standing it on a surface, and you have a single screen for the whole house.
